Product features

Do you have questions?
Conformal Coating

Swissbit offers a special protective coating on selected products. This coating is a thin polyurethane film which protects against aggressive environmental conditions such as dust, moisture or corrosive gas.

Conformal Coating

Data Care Managment

Various effects like data retention, read disturb limits or temperature can impact data reliability. The latest generation of Swissbit products use special methods to maintain and refresh the data for higher data integrity.

Data Care Managment

ESD and EMI safe

The product designs are in line with the latest regulations for electrostatic discharge and electromagnetic interference. Swissbit strives to exceed these limits with our own in-house technology and production capabilities, for example with System-in-Package (SiP) competence.

ESD and EMI safe

Life time monitoring (LTM)

The Swissbit Life Time Monitoring feature enables users to access the memory device’s detailed Life Time Status and allows predicting imminent failure avoiding unexpected data loss. This feature uses an extended S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) interface or vendor specific commands to retrieve the Flash product information.

Life time monitoring (LTM)

Longevity

The longevity product lines use special components with a long-term supply commitment of up to 10 years. These products offer lowest TCO in demanding applications with high requalification cost.

Longevity

Power fail protection

Intelligent Power Fail Protection & Recovery protects data from unexpected power loss. During an unintentional shutdown, firmware routines and an intelligent hardware architecture ensure that all system and user data will be stored to the NAND.

Power fail protection

Read only optimized

In many industrial applications the data is written to the NAND Flash once and is only read afterwards. For such cases the firmware can be optimized in order to guarantee highest possible data retention and less read disturb.

Read only optimized

Secure erase (Sanitize / Purge) / Fast erase

This feature uses an uninterruptable sequence of data erase commands. Even a power off can’t stop the process which will continue upon restoration of power. The optional enhanced feature allows the customer to sanitize the data according to different standards like DoD, NSA, IREC, etc. The purge algorithm can be started by a software command or through a hardware pin.

Secure erase (Sanitize / Purge) / Fast erase

Shock and vibration

Robustness is one of our key specification targets. The design, assembly and use of selected materials guarantee an extremely solid design which has been validated by extensive testing.

Shock and vibration

Temperature sensor

The sensor allows the host hardware or software to monitor the memory device temperature to improve data reliability in the target application environment.

Temperature sensor

Trim support

The TRIM command allows the operating system to inform the SSD which blocks of data are no longer considered in use and can be wiped out internally which increases system performance in following write accesses. With TRIM Support data scrap can be deleted in advance which otherwise would slow down future write operations to the involved blocks.

Trim support

WAF reduction

The WAF (write amplification factor) for MLC based products is reduced by combining a paged based FW block management with a powerful card architecture and configuration settings.

WAF reduction

Wear leveling

Sophisticated Wear Leveling & Bad Block Management ensure that Flash cells are sparingly and equally used in order to prolong life time of the device.

Wear leveling

Wide temperature support

Swissbit‘s embedded memory & storage solutions are designed and approved for reliable operation over a wide temperature range. The products are verified at temperature corners and prestressed with a burn-in operating functional test (Test During Burn In – TDBI).

Wide temperature support

Find your product

Find the right product according to your use case, the form factor, interface, speed and many other parameters that you can select by filters

  • Choose your use case 1
  • Set all your filters 2
  • See your product 3